Structural Precast

Precast Double Tees have traditionally been used in parking structures. Over the past decade, double tees have been integrated into the building envelope of other projects for use in floor and roof systems. We are pleased to bring you everything from 30′ and 40′ short spans to clear spans of over 100′ for gymnasiums, cafeterias, swimming pools, and more. Your project will benefit from the inherent fire resistance, speed of construction, and sustainable design that comes with our double tees.

We’ve been using the MetroDeck precast / prestressed concrete framing system for over fifteen years. This enduring system incorporates a floor and roof product that is based on proven engineering principles and applications. The thin floor plate design offers all the benefits of commercially available concrete systems and much more. The wet-cast floor and roof components are typically 9.5″ to 16″ deep and vary in width up to 13’4″, with the typical width being 12′. When the components are integrated with precast/prestressed columns, beams, and load-bearing walls, the framing system works well for projects of all sizes.

Partner with Metromont to start your project with expert design, high-quality products, and a team that cares about your success.

LEARN MORE >

Precast wall panels come in various shapes and sizes to meet your design needs. Typical widths include 10′, 12′, and 13′4″. Other custom widths are available. Typical wall panel heights range from 10′ to 50′ for a single element (to accommodate three-level structures). Structures with multi-stacked wall panels can reach heights of more than 120′. Products can be insulated for superior thermal efficiency. Our CarbonCast High Performance Insulated Wall Panels provide full composite action and continuous insulation for energy savings.

Exterior finishes include cast-in brick, sandblasting, formliners, reveals and custom mix designs.

Spandrels come in various shapes and sizes to meet specific design needs. Spandrels are typically used in parking garages and total precast office buildings. Typical spandrel lengths are 30′, 36′, 40′, and 48′. Other lengths are available. Typical heights are 72″ and 76″. Exterior finishes include cast-in brick, sandblasting, formliners, reveals, and custom mix designs.

With CarbonCast Insulated Architectural Cladding, you can get continuous insulation for thermal efficiency and energy savings.

Precast columns are available in various shapes and sizes. Square and rectangular columns are typically used with beams and spandrels in parking garages, total precast buildings, office buildings, schools, and mixed-use structures. Exterior finishes are available to complement other precast components, including cast-in brick, sandblasting, formliners, reveals, and custom mix designs.

Precast beams are available in various shapes and sizes. Beams are typically used in parking garages and total precast structures to carry and transfer precast floor and roof loads to columns. Inverted tee beams (IT) L-shaped beams (LB), and rectangular beams (RB) are available.

Count on Metromont to help you make your vision a reality. We’ll stand with you from start to finish, making sure you get the lasting solutions you need.